		News

		News Overview

		Press Releases

CONINVERS press service

"Plug & Turn" for Circular Connectors

Industrial connectors with SPEEDCON quick locking system

CONINVERS circular connectors of the series ConPower P20 (M17) and ConPower P70 (M40) are available with Speedcon quick locking system in addition to the standard screw locking.

Above all, Speedcon industrial circular connectors provide the following advantages:

Quick locking system for signal and power transmission in the field of
device connection technology/drive engineering,
measuring technology,
medical technology.
Low effort for locking (can be handled with two fingers).
"Blind" plugging and unplugging which results in a considerably easier handling under cramped or "non-viewable" assembly conditions.
Device flanges can optionally be combined with Speedcon cable connector or with standard cable connector without any restrictions.

According to the motto "Plug and Turn", the plug pairs can be plugged and locked without long screwing. The correct plug-in position of both connectors is clear and can thus be found very easily. For that purpose, the coupling nut is turned to its initial position at the mechanical stop to the left. This position is additionally marked by an arrow symbol. After plugging the connectors, they are locked by turning the coupling nut by approximately a half rotation to the right until the mechanical stop is reached. This handling is very easy and can be done without high effort. Mostly it can be done by using only two fingers. Once locked, an O-ring secures the coupling nut at its position and prevents reliably from loosening due to vibrations.

[Download Text German 0,19 MBytes]
[Download Text English 0,14 MBytes]
[Download high-resolution picture, CMYK, jpg 2,12 MBytes]

[Print version]	[Send to friend]	[Top]

		Address

	CONINVERS GmbH Heisenbergstr. 1 71083 Herrenberg, Germany Tel.: +49 70 32 / 92 74-0 info@coninvers.com

Homepage

News

		Quick Links

		About Us

		Contact Persons

		Newsletter